How to choose a software development company in 7 steps

Start with a short brief. Then compare three to five companies on things you can check yourself: work like yours, past clients you can call, how the team writes and tests code, and a proposal that says what it assumes. Before you sign for the whole build, pay for one small stage. At Ronas IT, it can be an analysis phase.
This guide is for founders and managers who are hiring an outside company to build a web or mobile product, for the first time or after a bad experience with another vendor. It follows the order in which you will make the choice, from the brief to the contract. If you want names to start from, our comparison of ten software outsourcing companies gives a shortlist. If you need a marketing website rather than a product, our guide to choosing a web design company fits that choice better.
The seven steps at a glance
Step 1 prepares the brief. Steps 2 to 6 narrow the list until you compare two or three serious options on the same terms, and step 7 tests the company you pick.
- Write a one-page brief.
- Build a shortlist of three to five companies.
- Check their work and their past clients.
- Use the first call to test how they think.
- Check how the team builds and tests software.
- Compare the proposals line by line.
- Start with a small paid stage.
Step 1. Write a one-page brief
A brief is one page that tells every company the same thing, so you can compare their answers. It does not need technical detail; it needs plain answers about the product, your limits, and who decides on your side.
- Problem: what the product changes for its users or for your business.
- Users: who will use it, and on which devices.
- First release: the few things that must work on launch day. Everything else goes on a list for later.
- Deadline: the date and what depends on it, such as a trade show or a funding round.
- Budget: a range you can spend. A company cannot suggest a cheaper path if it does not know your limit.
- What exists: designs, an old product, code, or documents, and who owns them.
- Who decides: the person on your side who makes product decisions and accepts the work.
If you cannot describe the first release yet, that is normal. Our analysis phase takes at least one week. In it, we describe who uses the product and how they move through it, check that the planned architecture can be built, and estimate the budget and the timeline in a scope document. When the scope is already clear, you can skip it and ask for an estimate directly. Our guide to how software estimates are built shows what an estimator needs from you.
Step 2. Build a shortlist of three to five companies
Three to five companies are enough to compare answers without spending weeks on calls. Look for companies that have built a product like yours, of a similar size, and that sell the kind of work you need. Use more than one source, because each source shows a different side of a company.
- Referrals: ask founders who launched a similar product who built it and whether they would hire that company again.
- Review platforms: Clutch and GoodFirms list companies by service and location, with reviews from their clients.
- Portfolios: case studies on company websites and design work on Dribbble or Behance show the products themselves.
- Search: a search for your type of product plus "development company" finds companies that write about that kind of work.
Decide which kind of help you need
Make this choice before you contact anyone, because the kind of help you need divides the market into different companies:
| What you need | What to look for |
|---|---|
| A product built and managed for you | A company that runs the whole project with its own project manager and tech lead |
| A long-term team for a product that keeps changing | A dedicated team whose members work on your product alone, under the team's own leadership |
| Developers who join your in-house team | Team augmentation: specialists who work in your process, managed by your own leads |
Our guide to the outsourced development team explains who manages the work in each of these models. As for location, the hours you share with the team and the way it runs projects matter more than the country, and our article on nearshore and offshore teams explains why.
Step 3. Check their work and their past clients
A portfolio shows what a company says it built. Check it against things the company does not control: the live product, its listing in the app stores, and the clients themselves. A case study you can confirm in two of these places is worth more than ten you cannot.

- Open the product: if a case names a live app or website, open it. A product that is no longer online can still be a real project, so ask what happened to it.
- Ask what part they did: design only, development only, or both. A design case does not prove that the company can build the backend.
- Read reviews for detail: look for reviews that name the kind of project, its size, and a problem the company solved along the way.
- Call past clients: ask for the contacts of two clients with projects like yours, and call them.
What to ask a past client
A short call with a past client tells you how the company behaves when things go wrong, which no case study shows. Ask the same questions for every company on your list:
- What did the company build for you, and is it still in use?
- Did the price or the deadline change, and why?
- How did they report progress, and how fast did they reply?
- What happened the first time something went wrong?
- Would you hire them for your next project?
We share the contacts of past clients on request, so you can ask them these questions yourself.
Step 4. Use the first call to test how they think
If your brief contains anything that is not public, sign a non-disclosure agreement first. Then send every company the same brief and watch what comes back. A strong company asks about your users, your data, and your deadline before it talks about price, and it may suggest a smaller first release. A weak one agrees to everything and sends a number.
Ask whether someone with technical experience will join the call. A person who has built software notices risks in the brief that a salesperson cannot see. On technical projects at Ronas IT, I take part in the first call myself, and I have an engineering background.
The first call is also where a company can save you money. When UK Retreats, a company that helps people find unusual vacation stays across the UK, came to us, our first short meeting showed how to reduce the complexity and cost of the project. An analysis of its audience then found that customers would rather use phones than computers, and the budget was limited, so instead of a native mobile app together with a website we proposed one mobile-first web app. The MVP was ready within three months. The founder later wrote:
“Ronas IT were the only company who were able to understand and even contribute to my vision.”
Bill Measom, Founder of UK Retreats, in a review on GoodFirms
Step 5. Check how the team builds and tests software
You do not need to read code to check engineering. Ask the company to describe what happens to a change before it reaches your users, who checks it, and where you will see the result.
- Testing and review: a good answer names each check in order. Ours: automated tests run on every commit, then a code review, a review by the team lead, a check by the project manager against the agreed scope, and your own review on a staging build, a test version your users do not see. In production, errors are tracked automatically.
- Code you can look at: public code shows how a company writes. Our internal packages and tools are public on GitHub.
- Default technologies: a company should be able to say which tools it picks by default and why. Our tech radar is public and rates more than 400 technologies.
- The team: ask for the roles of the people who will work on your project and whether the core developers stay from the first day to release. On our projects they do, and other roles are added by stage.
“When a company says it tests everything, ask to see one real task the way a developer receives it. You want to see what has to be done, what result is expected, and how it will be checked. If that is written down, testing is part of the work. If it lives only in someone's head, it is the first thing skipped before a deadline.”
Alexander Storozhevsky, Lead developer at Ronas IT
Ask how the team uses AI and agents
Many companies say they use AI in delivery, so the useful question is not whether they use it but how, and who is responsible for the result. Ask every company on your list the same five questions:
- Who owns what an agent produces: a named engineer should accept each piece of agent work and be responsible for it.
- How agent output is checked: code an agent writes should pass the same tests and reviews as code a person writes. Code that runs is not necessarily safe: when Veracode tested more than 100 language models on 80 coding tasks in 2025, 45% of the generated samples failed its security tests and brought in flaws from the OWASP Top 10 list of common web vulnerabilities. Ask which checks a person does, which run automatically, and whether a security scan is one of them.
- How big each change is: agents tend to produce larger changes, and a larger change is harder to review. DX, a vendor of engineering measurement tools, reports that the typical pull request at its customer companies went from 44 lines to 72 in the year to June 2026, as more of the code came from AI. Ask how the team keeps changes small enough for a reviewer to read in full.
- Where your code and data go: ask which AI services see your code and documents, under whose accounts, and whether that fits your contract and your rules for data.
- Whether the gain reaches you: if agents make the work faster, the price and the timeline in the proposal should show it. A company that says it uses AI everywhere should be able to point to where that shows in its timeline and price.
At Ronas IT, our engineers and designers work with AI agents at every stage, from analysis and design to coding, testing, release and support, and every change the agents make passes the same chain of checks described above, including an automatic AI code review. Our engineers plan the implementation, set the agents' tasks, make the architecture decisions and accept the result, and the person who runs an agent owns what it delivers. Our AI agents run on business or API plans from AI model providers, and your data is not used to train AI models.
Step 6. Compare the proposals line by line
Two proposals can be compared only when they describe the same work. Check both against the lines below before you compare the totals, because a lower total may cover less work.
| Line | What a complete proposal shows | Warning sign |
|---|---|---|
| Scope | The features of the first release, listed one by one | One line such as "MVP" or "full app" |
| Assumptions | The proposed stack, the team, and the third-party services the build depends on | A total with no conditions |
| Team | The roles on the project | "Our developers" with no roles |
| Timeline | Milestones and what you can open at each one | A single end date |
| Changes | How a new request is estimated and approved | Not mentioned |
| Exclusions | Design, project management, hosting, and support, each marked as included or extra | Silence about what is not included |
| After launch | Who maintains the product and what that covers | Nothing after the release date |
Our estimates list the stack, team and third-party services they assume, so you can see what would change the price. The pricing model also changes what a total means: a fixed price holds for a fixed scope, while time and materials bills the hours actually spent. Our article on fixed price vs. time and materials shows which projects suit each model.
Step 7. Start with a small paid stage
The safest way to test a company is to pay it for a small piece of real work before you commit to the whole build. You see its reports, its reply times, and the quality of its work on your own project. If the company does not suit you, you have spent a small part of the budget to find out.

Pick the first stage by what you need to learn:
- Analysis phase: for a scope that is not written down yet, or a technical question that has to be answered before you build around it, such as whether an integration nobody has tried will work. At Ronas IT, it is our smallest paid stage, from $1,000, and its result is a scope document with a budget and a timeline.
- First sprint: for a scope that is already clear, under a contract that lets you stop after it. With us, a sprint typically runs one to three weeks, and each one gives you something to open yourself, such as an update on the development server, a screen ready for testing, or new designs.
During this stage, check what the company promised on the calls. Every week, our project managers report the work completed and the plan for the following week, and they answer client messages within 24 hours on business days. If a company does not keep its promises in the first weeks, treat that as a warning.
Red flags when choosing a software development company
Many warning signs show up before you sign, in the way a company sells: a price before any questions about your product, nobody technical in the conversation, or no past clients to call. Treat each one as a question to ask. If the answer does not resolve it, remove the company from your list.
| Red flag | Why it matters | What to ask |
|---|---|---|
| A price before any questions about your product | The number is not based on your scope | What does this price assume? |
| Nobody technical in the conversation | Technical risks stay unnoticed until development starts | Can someone technical join the next call? |
| No past clients you can call | You cannot check the case studies | Can I talk to two clients with projects like mine? |
| Results only at the end of a phase | You pay for months before you see any work | What will I be able to open after each sprint? |
| No written transfer of the code and the cloud account | Moving to another team becomes a project of its own | Where will the repositories and production live? |
| A discount that ends this week | You compare fewer companies and read the contract faster | Will the price hold until I finish my comparison? |
| No plan after launch | Bug fixes and OS updates have no owner | Who maintains the product, and what does it cost? |
If you are replacing a company in the middle of a project, our guide to software project rescue covers what to check before another team takes over the code.
What to check in the contract
The contract turns the answers you collected into obligations. Check four things in it: who owns the code, where the repositories and the production cloud account live, how a change request is estimated and approved (the "Changes" line in step 6), and how the work is handed over if you stop working together.
Do not assume that paying for the code makes it yours. The US Copyright Office explains that a commissioned work counts as a "work made for hire" only if it falls into one of nine listed categories and the parties sign a written agreement that expressly calls it a work made for hire (Circular 30). Ask for a clause that assigns the copyright to you, and have your lawyer read it.
Our projects start in your own cloud account. We create the repository in your organization on GitHub, Bitbucket, or GitLab, or provide our own GitLab with a transfer to you on request, and the transfer of code and access is written into our standard contract. If the product later moves to your in-house team, we hand it over in a structured process of two to four weeks that includes deployment runbooks and knowledge transfer. Our article on the contract and the first 90 days with an outsourcing company walks through each clause.
What it costs to start with Ronas IT
At Ronas IT, paid work can start at $1,000 with an analysis phase, and a basic MVP starts at $5,000 with design, the backend, and project management included. The full price of a product follows from its scope, and we quote it after we see which problem the product is meant to solve. Here is where each kind of work starts:
- Analysis phase: $1,000-$2,000, and takes at least one week.
- Basic MVP: from $5,000, and takes at least two weeks, for the core features on one platform: a web app, one cross-platform app for iOS and Android, or one native app. A proof of concept with working code is priced as a basic MVP.
- Second platform: from 50% of the first, for example a mobile app next to a web MVP, because it reuses the same backend, admin panel, and design system.
- Complex product: from $20,000, and takes at least eight weeks, for a product with complex business logic, such as a marketplace, a SaaS product, or a booking platform.
- Dedicated development team: from $8,000 per month for two developers, who work on your product alone, and a part-time project manager.
- After launch: support from $1,000 per month for a single app, or from $2,000 per month for the whole system: the apps, the backend, and the admin panel. The cloud bill comes to you directly from the provider, because production runs in your own account.
Every development price above already includes design, project management, testing, and the backend and admin panel the product needs, so a quote does not grow by those lines. If your problem does not need custom software, we will tell you so and suggest another way to solve it.
What to do next
- Write the one-page brief, with the first release and a budget range.
- Pick three to five companies that have built products like yours.
- Call two past clients of each company.
Then send all of them the same brief, compare the proposals with the table in step 6, and pay for one small stage first.
Frequently Asked Questions (FAQs)
How do I choose a software development company?
Write a one-page brief and send it to three to five companies that have built products like yours. Check their past work and call their past clients. Notice which companies ask questions before they name a price, compare the proposals item by item, and pay for a small first stage before you sign for the whole build.
What questions should I ask a software development company?
Ask what their estimate assumes, who will work on your project, and whether those people stay until release. Ask what happens to a change before it reaches your users and what you can open at the end of each sprint. Then ask where the code and the cloud account for production will live and who maintains the product after launch.
How many software development companies should I compare?
Three to five is enough. With fewer, you have little to compare the answers against. With more, the calls and the proposals take weeks, the details get harder to keep apart, and you start to choose on price alone.
How do I know if a software development company is reliable?
Check what the company cannot control: live products from its case studies, reviews that describe projects in detail, and past clients you call yourself. Then test the company on a small paid piece of work. Its reports, its reply times, and the work you can open after the first sprint tell you more than any presentation.
Should I choose a local or an offshore software development company?
Location matters less than two practical things: how many working hours you share with the team, and how the company runs projects. A remote team with a fixed reporting rhythm and shared hours for calls can work better than a local team without them. Check the shared hours before you sign.
Do I need to pay for a discovery or analysis phase?
No, it is optional. It helps when the scope is not written down yet. At Ronas IT, an analysis phase costs $1,000-$2,000. If your scope is already clear, the company can estimate it directly.
Who owns the code a software development company writes?
The contract decides it. Get a written clause that assigns the copyright to you and states the point at which it passes to you, and ask your lawyer to review it. Then confirm where the repositories and the production cloud account are hosted: legal ownership of the code is of little use if you have no access to it.
How much does it cost to hire a software development company?
It depends on the scope and the model. At Ronas IT, a basic MVP starts at $5,000 for one platform, a web app or one iOS and Android app, with design, the backend, and project management included; a second platform adds from half of that. A dedicated team starts at $8,000 per month. We give you a total after we understand which problem the product must solve.






